USD
FUTABA 26SZ with R7308SB
Experience unparalleled control and flexibility with the Futaba 26SZ 2.4GHz FASSTest 26-Channel Air Radio System—an advanced RC transmitter designed to support high-performance models with precision and ease. With its vibrant touch screen, customizable alerts, and powerful 26-channel capability, the 26SZ is built to meet the demands of serious pilots who need both reliability and adaptability.
FEATURES
FASSTEST SYSTEM:
The 26SZ transmitter has adopted the bidirectional communication system “FASSTest.” Data from the receiver can be checked in your transmitter. FASSTest is a dedicated system with a maximum of 26 channels and 2.4 GHz.
COLOR TOUCH SCREEN LCD:
T26SZ has an HVGA 4.3 inch, full-color backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.
S.BUS2 SYSTEM:
Using the S.Bus2 system, multiple servos, gyros, and telemetry sensors can be easily installed with a minimum of cables.
MODEL TYPES:
Multicopter. 8 swash types are available for helicopters. 7 types of main wings and 3 types of tail wings are available for airplanes and gliders. Functions and mixing functions necessary for each model type are set in advance at the factory.
LIPO BATTERY:
The 26SZ is operated by a 7.4 V/2,000 mAh Lithium Polymer battery.
SD CARD (SECURE DIGITAL MEMORY CARD) *NOT INCLUDED:
Model data can be saved to an SD card (SD: 32MB – 2GB, SDHC: 4GB-32GB). When T26SZ transmitter software files are released, the software can be updated by using an SD card update.
EDIT BUTTON:
Two edit buttons are provided, and the operating screen can be immediately “Returned” to the HOME screen during operation. Setting operation can be performed easily by combining this button with a touch sensor.
VIBRATION FUNCTION:
Selects a function that alerts the operator to various alarms by vibrating the transmitter in addition to sounding a buzzer.
SPEECH FUNCTION:
A function is equipped to allow the system to provide audible telemetry data. This function can also be utilized with commercially available earphones.
CONTENTS
YOUR T26SZ INCLUDES THE FOLLOWING COMPONENTS:
- T26SZ Transmitter
- LT2F2000 Battery
- Switch Harness
- Mini Driver
- R7308SB Receiver
*NOTE: The battery in the T26SZ transmitter does not arrive already attached to the battery connector. Please connect the battery connector before use.
TRANSMITTER FREQUENCY:
2.4 GHz band
SYSTEM:
FASSTest26CH, FASSTest18CH, FASSTest12CH, T-FHSS, S-FHSS, switchable
POWER SUPPLY:
7.5V FT2F2100BV2 LiPo battery
FREQUENCY BAND:
2.4 GHz
RF POWER OUTPUT:
100mW EIRP
Compatible receivers as of 10/1/24.
S-FHSS PROTOCOL
R2008GS
R2008SB
R2106SB
R2001SB
R2000SBM
T-FHSS TELEMETRY PROTOCOL
R3001SB
R3004SB
R3006SB
R3008SB
T-FHSS MONO (NON-TELEMETRY)
R3206SBM
R3106GF
FASSTest12 and FASSTest18
R7003SB
R7006SB
R7008SB
R7108SB
R7014SB
R7208SB
R7214SB
R7206SB
FUTABA 26SZ with R7308SB
dTRANSMITTER FREQUENCY:
2.4 GHz band
SYSTEM:
FASSTest26CH, FASSTest18CH, FASSTest12CH, T-FHSS, S-FHSS, switchable
POWER SUPPLY:
7.5V FT2F2100BV2 LiPo battery
FREQUENCY BAND:
2.4 GHz
RF POWER OUTPUT:
100mW EIRP
R7308SB– FASSTest Bi-Directional Communication System with S.Bus / S.Bus2 Port and 8 Channels for Conventional System Receiver.
The R7308SB is equipped with the Dual Rx Link system allowing a second FASSTest Rx to be connected via an SBUS2 port and offer Rx redundancy.
SIZE:
24.9 mm x 38.8 mm x 14.3 mm
0.98 in x 1.53 in x 0.56 in
WEIGHT:
11.0 g
0.39 oz
POWER REQUIREMENTS:
3.7 V to 7.4 V (Voltage Range: 3.5 V to 8.4 V)
EXTRA VOLTAGE PORT:
0 ~ 70 V DC