FLIGHT POINT Shaka Slope Wing Kit

Includes laser-cut balsa, plywood parts, carbon fiber rods & tubes, accessories pack (wing bolts, ball links, servo clevises, etc.), and a full-size printed plan.

Take a break from the real world and hang loose on the slope with Shaka – a portable 1-meter slope glider. It is a flying wing that is designed for endless joy on a windy day.

Shaka features a classic balsa/plywood construction, reinforced with carbon fiber tube spars and a leading edge.

This is an RC slope glider Kit that has to be assembled and covered, not a built-up model.

However, it is extremely easy to build in approx. 4-7 hours and will bring you a lot of fun on a windy day.

In addition, you can convert it to an E-Glider by ordering a spare eFuse Kit that makes the best fit for a popular drone motors.

A Potrable RC Slope Glider Kit
Shaka slope glider is collapsible for transportation and storage. Simply unscrew 2 bolts and take the fuselage and both wings apart. It’s as easy as that.

The fuselage has a hatch for easy access to the interior and electronics. 2 servos, there is a room for almost any ~10g servo, are glued into the dedicated places in the wing and drive 2 elevons.

This Kit comes with a complete accessory set that includes two M4 nylon wing mounting bolts and a pair of M4 nuts to be glued into the fuselage during assembly, control horns, ball linkages, and servo horn clevises for pushrods, etc.

Note: a covering film is not included in the Kit

The assembly usually takes approx 7-9 hours.

A build manual is available online and can be found by scanning a QR code on the plan that comes in the box.

Tehnical Data
Wingspan: 965mm
Flying weight: ~220g
Controls: Elevons – 2 channels
Skill level: Intermediate
Flight style: Slope Soaring in light to medium wind conditions.

Recommended Electronics:
1s 600mAh LiPo battery. Similar size 2S battery can be used with BEC and less lead in the nose.
2*~10g servos, HXT 900 or similar
2CH+ Rx
Radio Tx with delta mixing capabilities