FUTABA 16IZ with R2006GS

SGD 746.73

16IZ Transmitter – 18-Channel Computer System

2-Stick, 18-Channel, FASSTest 2.4 GHz System

Share this product

16IZ FEATURES

FASSTEST SYSTEM:
The 16IZ transmitter adopted the bidirectional communication system “FASSTest”. Data from the receiver can be checked in your transmitter. FASSTest is a maximum 18 channels (linear 16 channels + switch 2 channels) 2.4 GHz dedicated system.

S.BUS2 SYSTEM:
By using the S.Bus2 system multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.

USB SIMULATOR CONTROL:
The T16IZ offers USB C compatibility for simulator control when used with Windows OS Joystick function.

COLOR TOUCH SCREEN LCD:
T16IZ has an updated HVGA 4.3 inch, full-color backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.

MULTI HOLDER:

T16IZ Offers Multi holder near the antenna/charging port. It allows for accessories to be mounted using an M3 style screw.

Voice Telemetry:
The T16IZ allows for audible telemetry data to be read aloud for easy understanding of crucial parameters while flying.

SECURE DATA (SD CARD):
Model data, music files, voice files, and picture files can be stored on optional microSD card. The microSD card is also used when updating the software/features of the T16IZ.

HIGH CAPACITY LITHIUM POLYMER BATTERY (2000 MAH):
The high capacity 2S Lithium Polymer battery gives you extended flight time.

EDITING:
The touch panel and two enter keys allows you to edit your model in the manner that is easiest for you.

FUNCTIONS:
The internal processor   the response time. Most of the mixing functions are operated by curves which give you very precise settings.

STICK:
Each stick offers our reliable single ball bearing for each axis. With our high cycle potentiometer this allows for finer and more precise operation.

VIBRATION FUNCTION:
Low voltage and other alarms are generated by a vibration motor. Alarms or vibrations to be used can be selected by the owner.

CONTENTS

YOUR T16IZ (PACKAGED WITH A S.BUS RECEIVER) INCLUDES THE FOLLOWING COMPONENTS:

  • T16IZ Transmitter (Air Version includes ratcheting throttle, Helicopter Version includes smooth throttle)
  • LT2F2000B Lithium Polymer Battery and USB cable for charging
  • Switch Harness
  • Neck Strap
  • Manual (Printed short version. Find full version here)

TRANSMITTER SPECS

TRANSMITTER FREQUENCY:
2.4 GHz band

OPERATING SYSTEM:
2-Stick, 18-Channels, 2.4 GHz FASSTest/FASST/T-FHSS/S-FHSS System

POWER SUPPLY:
7.4 V LT2F2000B Lithium-polymer battery

RF POWER OUTPUT:
100 mW EIRP


The Futaba R2006GS Receiver is designed to work with the new Futaba 6JG 6-channel 2.4GHz Radio System. It auto-adapts to the transmission mode selected, whether it’s FHSS or high-speed S-FHSS mode. And since it operates on a wide range of voltage, you don’t need a regulator even if you use a 2S, 7.4V LiPo pack as a power source

Specifications:

Type: Full-range flight receiver 
Modes: FHSS or S-FHSS 
Features: Easy-Link™ binding, high-voltage operation, frequency-hopping, spread-spectrum design & Dual Antenna Diversity
Voltage Input: 4.8V-7.4V 
Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
Dimensions: 1-11/16 x 15/16 x 516 in (43 x 24 x 7.9 mm) 
Weight: 0.29 oz (8.3 g)

Futaba 18SZ/16SZ/16IZ Instructional Videos

Ep. 01 - Unboxing and Updating Firmware

Ep. 02 - Model Basic Setting

Ep. 03 - Servo Connections

Ep. 04 - Servo Reverse

Ep. 05 - Sub Trims 

Ep. 06 - End Point

Ep. 07 - Trim Mix 

Ep. 08 - Aileron Differential 

Ep. 09 - Aileron to Rudder Mix 

Ep. 10 - Conditions 

Ep. 11 - Dual Rates 

Ep. 12 - Butterfly Setup 

Join our growing community. SUBSCRIBE!

Weight: 1.7500
FUTABA 16IZ with R2006GS
YOUR RATING