FUTABA GYD450 Car Drift Gyro

FUTABA GYD450 Car Drift Gyro

The new GYD450 is a compact and lightweight designed gyro to control the steering for R/C Drift cars.

If the transmitter has 3 or more channels (capable of 3CH adjustment) the gyro sensitivity can be adjusted from the transmitter. Features include simple set-up and S.BUS/S.BUS2 connectivity.

Dedicated RC Drift car setting

Vehicle straight-line and cornering performance can be increased without taking into account the effect of the road surface, etc.

Remote gain function and mode switching function

You can adjust gain from the transmitter (3 or more CH) by using the remote gain function. Gain can also be adjusted with the trimmer on the GYD450. The mode switching function allows AVCS/NORMAL gyro mode switching.

Integrated, compact, and light weight

Compact size (20.5x20.5x11 mm) and light weight (3.7 g) realized by high density mounting technology.

Easy setup

The GYD450 can be used immediately with minimum setup.

Supporting S.BUS/S.BUS2 connection

Only one wire connection to the receiver can operate the GYD450.

GYD450 Specifications

(Integrated sensor type rate gyro)
Gyro sensor: MEMS vibrating structure gyro
Operating voltage: DC4.2V to 8.4V
Current drain: 30mA (excluding a servo)
Operating temperature range: -10ºC to +45ºC
Dimensions: 20.5 x 20.5 x 11.0 mm (except protrusion)
Weight: 3.7 g
Functions: Sensitivity trimmer. LED monitor. Servo selection (SR mode ON/OFF for T7PX). S.BUS/S.BUS2 connection.

In the Box:

- Futaba GYD450 Gyro
- Mini screwdriver
- Extension cord
- Double sided tape
- Nylon straps

**Only for Futaba digital servos