USD
SwitchGlo Pro Push Button
This 15 inch long SwitchGlo Pro Push Button Accessory is designed for SwitchGlo Pro and it is used as a secondary method to trigger glow when the craft is on the ground, or the sole method to trigger glow depending on SGP's Sip-2 switch position. (TX On/Off)
Once plugged into the accessory port, press the button for 12 seconds of glow time, afterwhich SwitchGlo Pro automatically shuts off. Each additional press adds 12 more consecutive seconds, up to 5 presses maximum, for a full minute of glow time. Press and hold down button for 2 seconds to terminate a glow early.
Very easy to install through a fuselage, body, or canopy with 1/4 hole, for a near invisible outer finish look. You'll just need some Velcro or double stick tape.
Note: SwitchGlo Pro shown in picture is for illustration purpose only. Not included in package.
| Weight: | 0.0100 |